thermal cycling

In this paper, using ground-based simulation facilities, the vacuum thermal cycling test was carried out on the epoxy construction adhesive.

本文利用空间环境效应地面模拟设备对环氧结构胶粘剂进行了真空热循环试验。

Gravitational Field in the Ideal Gas Thermal Cycling and the Potential Energy into Heat

重力场中理想气体的位能热循环及热功转化

Experimental Study on Thermal Cycling Behavior of Fatty Acids as Phase Change Materials

脂肪酸相变储能材料热循环行为的试验研究

Thermal cycling absorption process ( TCAP) in a full reflux mode was studied at different feeding ratios, feeding places and heating/ cooling temperatures.

分别在不同进料比、进料位置、加热/冷却温度的条件下，对TCAP工艺的全回流模式进行了实验。

Probe into thermal fatigue fracture behaviour of certain cast steel wheel material under thermal cycling of 600 ℃~ 20 ℃

铸钢车轮材料在600℃~20℃循环温度幅下热疲劳断裂行为探讨

The effect of thermal cycling conditions on the thermal shock fatigue behavior of 40% Ni-Ti ( C, N) cermets has been studied.

研究了循环条件对40%Ni－Ti（C，N）金属陶瓷热冲击疲劳的影响。

The thermal cycling test between 153 K-393 K were performed on SiCw/ AZ91 magnesium matrix composite with the load of 20 MPa, and the tensile properties of SiCw/ AZ91 before and after thermal cycling were evaluated.

对碳化硅晶须增强AZ91镁基复合材料在153K～393K进行加载热循环试验，载荷为20MPa静载荷，测定了复合材料在热循环前后的力学性能。

Then thermal cycling stability and radiation exposure experiments are performed to simulate the space environment.

然后，分别进行了热循环实验与射线辐照实验。

Thermal Cycling Stability of Paraffin Wax as Phase Change Materials for Solar Energy Storage

太阳能蓄热石蜡类相变材料循环稳定性

Reliability of CBGA soldered joint under thermal cycling

CBGA焊点热循环条件下的可靠性

During the thermal cycling cracks propagation, cracks deflection, bridge and pinning are the most predominant reasons that the improvement of thermal shock fatigue resistance of composites.

在热震循环裂纹扩展中，裂纹偏转、桥联和钉扎是复合陶瓷热震疲劳抗力得到改善的主要原因。

Microstructure and fracture of Pb-free solder interconnects in CBGA packages under thermal cycling

CBGA结构热循环条件下无铅焊点的显微组织和断裂

The thermal fatigue fracture behavior of some cast steel wheel material under thermal cycling of 600~ 20 ℃ was studied.

研究了铸钢车轮材料在循环温度幅600~20℃下的热疲劳断裂行为。

Study of Ceramic Thermal Barrier Coating and Thermal Cycling Test

陶瓷热障涂层和热循环试验研究

Among all hydrogen isotope separation technologies, Thermal Cycling Absorption Process ( TCAP), a semi-continuous hydrogen isotope separation process, is of many unique advantages.

热循环吸附工艺（TCAP）是一种半连续的氢同位素分离方法，在分离氢同位素方面有许多独特的优越性。

To compared the thermal cycling curve of squeeze-casting alloy with die-casting alloy, it is shows that the thermal behavior of the squeeze-casting alloy impacted by the residual strain and the precipitated phase.

挤压铸造态AZ91合金与压铸态AZ91合金的热循环曲线相比较，发现挤压铸造态合金的热膨胀行为受残余应变和析出相双重的影响。

The thermal cycling test of divertor target plate was carried out in the vacuum;

在真空室中用大功率电子束作为热源进行了热疲劳试验。

Influence of Thermal Cycling on Dimensional Stability of 20% SiC_w/ 6061Al Composite

热循环对20%SiC w/6061Al复合材料尺寸稳定性的影响

Analysis of sress-strain in soldered joints and optimization of temperature profile of HALT thermal cycling test

焊点热应力应变分析与HALT热循环温度剖面图优化

Based on simulated aerospace thermal cycling test, the effect of thermal cycle on the fracture mechanism of LF6 aluminum alloy welded joint was investigated.

通过模拟空间热循环试验，研究了热循环因素对LF6铝合金焊接接头断裂机理的影响。

Different process parameters of rotating arc welding affect the welding joint microstructure, which directly related to the thermal cycling curve of rotating arc welding.

旋转电弧的不同焊接工艺参数对焊接接头的微观组织有影响，这与旋转电弧焊接时的热循环曲线有直接的关系。

Application of Inverter on the Multi-pump Control System for Thermal Cycling Water

变频器在热循环水多泵控制系统中的应用

Optimal Design on Key Components of Thermal Cycling System of Coating Line

涂装生产线热循环系统关键组件的优化设计方法研究

Actual thermal cycling curve of welded seam of laser welding is obtained to zinc coated high strength steel.

对激光焊接高强度镀锌钢板时接头上热循环作了试验测定，测出了焊缝热影响区的实际热循环曲线。

Influence of Thermal Cycling on Two Way Memory Effect in Cu-Zn-Al Alloy

热循环对Cu－Zn－Al合金双程记忆效应的影响

Heating system guarantees the drying of glass because of adopting thermal cycling wind.

采用风机的热循环风,并有加热系统保证了玻璃的干燥度.

As a result of repeated thermal cycling, fatigue cracks developed in the solder interconnects.

随着热循环周数的增加, 焊点中出现疲劳裂纹.

Broken raw WC particle still keeps raw shape eutectic carbide is severely smashed during thermal cycling.

原始碳化物开裂后仍保有原始形貌,复式碳化物开裂后易“碎化”.

Effect of thermal cycling on the color stability of bonding agent of porcelain veneers

温度变化对瓷贴面黏结剂颜色影响的实验研究

The paper discusses the importance of thermal tests of difference types ( thermal balance test, thermal vacuum test and thermal cycling test) in the spacecraft development, and also their implementation.

论述了各种类型热试验（热平衡试验、热真空试验、热循环试验）在航天器研制中的重要性及它们的试验要点。